{"schema":"vulnpedia.research/1","cve":"CVE-2026-93262","generated":"2026-10-26T13:52:32.101Z","references":[{"url":"https://git.kernel.org/stable/c/cf01f9413565e86673baf927291a088b6975692b","tags":[],"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","origins":[{"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","url":"https://git.kernel.org/stable/c/cf01f9413565e86673baf927291a088b6975692b"},{"source":"nvd","sourceId":"CVE-2026-93262","modified":"2026-10-19T10:17:17.523","url":"https://git.kernel.org/stable/c/cf01f9413565e86673baf927291a088b6975692b"}]},{"url":"https://git.kernel.org/stable/c/e7505842f1329ece90cb9ea0db87772aeca44052","tags":[],"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","origins":[{"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","url":"https://git.kernel.org/stable/c/e7505842f1329ece90cb9ea0db87772aeca44052"},{"source":"nvd","sourceId":"CVE-2026-93262","modified":"2026-10-19T10:17:17.523","url":"https://git.kernel.org/stable/c/e7505842f1329ece90cb9ea0db87772aeca44052"}]},{"url":"https://git.kernel.org/stable/c/b5123bf667ac29ddd8106f9ca7cc01316513ae66","tags":[],"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","origins":[{"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","url":"https://git.kernel.org/stable/c/b5123bf667ac29ddd8106f9ca7cc01316513ae66"},{"source":"nvd","sourceId":"CVE-2026-93262","modified":"2026-10-19T10:17:17.523","url":"https://git.kernel.org/stable/c/b5123bf667ac29ddd8106f9ca7cc01316513ae66"}]},{"url":"https://git.kernel.org/stable/c/e77c80670f2c2bf491da9b173931e1da4677c23a","tags":[],"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","origins":[{"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","url":"https://git.kernel.org/stable/c/e77c80670f2c2bf491da9b173931e1da4677c23a"},{"source":"nvd","sourceId":"CVE-2026-93262","modified":"2026-10-19T10:17:17.523","url":"https://git.kernel.org/stable/c/e77c80670f2c2bf491da9b173931e1da4677c23a"}]},{"url":"https://git.kernel.org/stable/c/8914c3d40870f16429a326e97e4016bedc6ede4c","tags":[],"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","origins":[{"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","url":"https://git.kernel.org/stable/c/8914c3d40870f16429a326e97e4016bedc6ede4c"},{"source":"nvd","sourceId":"CVE-2026-93262","modified":"2026-10-19T10:17:17.523","url":"https://git.kernel.org/stable/c/8914c3d40870f16429a326e97e4016bedc6ede4c"}]},{"url":"https://git.kernel.org/stable/c/455b56209f9615c3902dcc398dd867abb5ade3ab","tags":[],"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","origins":[{"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","url":"https://git.kernel.org/stable/c/455b56209f9615c3902dcc398dd867abb5ade3ab"},{"source":"nvd","sourceId":"CVE-2026-93262","modified":"2026-10-19T10:17:17.523","url":"https://git.kernel.org/stable/c/455b56209f9615c3902dcc398dd867abb5ade3ab"}]},{"url":"https://git.kernel.org/stable/c/fcf21df7d3c50c8ebeb0757df5d21b02dcae4218","tags":[],"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","origins":[{"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","url":"https://git.kernel.org/stable/c/fcf21df7d3c50c8ebeb0757df5d21b02dcae4218"},{"source":"nvd","sourceId":"CVE-2026-93262","modified":"2026-10-19T10:17:17.523","url":"https://git.kernel.org/stable/c/fcf21df7d3c50c8ebeb0757df5d21b02dcae4218"}]},{"url":"https://git.kernel.org/stable/c/371f7a1b392edc8b7cf449cc7713179b588f2d0e","tags":[],"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","origins":[{"source":"mitre","sourceId":"Linux","modified":"2026-10-19T09:08:15.484Z","url":"https://git.kernel.org/stable/c/371f7a1b392edc8b7cf449cc7713179b588f2d0e"},{"source":"nvd","sourceId":"CVE-2026-93262","modified":"2026-10-19T10:17:17.523","url":"https://git.kernel.org/stable/c/371f7a1b392edc8b7cf449cc7713179b588f2d0e"}]},{"url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","tags":["vendor-advisory"],"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"url":"https://access.redhat.com/security/cve/CVE-2026-93262","tags":["vendor-reference"],"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://access.redhat.com/security/cve/CVE-2026-93262"}]},{"url":"https://bugzilla.redhat.com/show_bug.cgi?id=2540323","tags":["vendor-reference"],"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://bugzilla.redhat.com/show_bug.cgi?id=2540323"}]},{"url":"https://www.cve.org/CVERecord?id=CVE-2026-93262","tags":["vendor-reference"],"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://www.cve.org/CVERecord?id=CVE-2026-93262"}]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-93262","tags":["vendor-reference"],"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://nvd.nist.gov/vuln/detail/CVE-2026-93262"}]},{"url":"https://git.kernel.org/pub/scm/linux/security/vulns.git/plain/cve/published/2026/CVE-2026-93262.mbox","tags":["vendor-reference"],"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://git.kernel.org/pub/scm/linux/security/vulns.git/plain/cve/published/2026/CVE-2026-93262.mbox"}]},{"url":"https://access.redhat.com/errata/RHSA-2026:83157","tags":["vendor-remediation"],"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://access.redhat.com/errata/RHSA-2026:83157"}]},{"url":"https://access.redhat.com/errata/RHSA-2026:83159","tags":["vendor-remediation"],"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://access.redhat.com/errata/RHSA-2026:83159"}]},{"source":"euvd","sourceId":"EUVD-2026-86134","url":"https://euvd.enisa.europa.eu/vulnerability/EUVD-2026-86134","tags":["ADVISORY"],"origins":[{"source":"euvd","sourceId":"EUVD-2026-86134","url":"https://euvd.enisa.europa.eu/vulnerability/EUVD-2026-86134"}]}],"packages":[],"pocCandidates":[],"cataloguedPoc":[],"vendorStatements":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"BaseOS-8.10.0.Z.MAIN.EUS:bpftool-0:4.18.0-553.174.1.el8_10.aarch64","product":"bpftool-0:4.18.0-553.174.1.el8_10.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83157"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/bpftool@4.18.0-553.174.1.el8_10?arch=aarch64","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"BaseOS-8.10.0.Z.MAIN.EUS:kernel-core-0:4.18.0-553.174.1.el8_10.ppc64le","product":"kernel-core-0:4.18.0-553.174.1.el8_10.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83157"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/kernel-core@4.18.0-553.174.1.el8_10?arch=ppc64le","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"BaseOS-8.10.0.Z.MAIN.EUS:kernel-debug-devel-0:4.18.0-553.174.1.el8_10.aarch64","product":"kernel-debug-devel-0:4.18.0-553.174.1.el8_10.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83157"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/kernel-debug-devel@4.18.0-553.174.1.el8_10?arch=aarch64","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"BaseOS-8.10.0.Z.MAIN.EUS:kernel-debuginfo-0:4.18.0-553.174.1.el8_10.x86_64","product":"kernel-debuginfo-0:4.18.0-553.174.1.el8_10.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83157"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/kernel-debuginfo@4.18.0-553.174.1.el8_10?arch=x86_64","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"BaseOS-8.10.0.Z.MAIN.EUS:kernel-modules-extra-0:4.18.0-553.174.1.el8_10.ppc64le","product":"kernel-modules-extra-0:4.18.0-553.174.1.el8_10.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83157"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/kernel-modules-extra@4.18.0-553.174.1.el8_10?arch=ppc64le","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"BaseOS-8.10.0.Z.MAIN.EUS:kernel-zfcpdump-0:4.18.0-553.174.1.el8_10.s390x","product":"kernel-zfcpdump-0:4.18.0-553.174.1.el8_10.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83157"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/kernel-zfcpdump@4.18.0-553.174.1.el8_10?arch=s390x","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"BaseOS-8.10.0.Z.MAIN.EUS:python3-perf-0:4.18.0-553.174.1.el8_10.ppc64le","product":"python3-perf-0:4.18.0-553.174.1.el8_10.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83157"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/python3-perf@4.18.0-553.174.1.el8_10?arch=ppc64le","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"CRB-8.10.0.Z.MAIN.EUS:kernel-debuginfo-0:4.18.0-553.174.1.el8_10.x86_64","product":"kernel-debuginfo-0:4.18.0-553.174.1.el8_10.x86_64 as a component of Red Hat Enterprise Linux CRB (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83157"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/kernel-debuginfo@4.18.0-553.174.1.el8_10?arch=x86_64","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"CRB-8.10.0.Z.MAIN.EUS:python3-perf-debuginfo-0:4.18.0-553.174.1.el8_10.x86_64","product":"python3-perf-debuginfo-0:4.18.0-553.174.1.el8_10.x86_64 as a component of Red Hat Enterprise Linux CRB (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83157"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/python3-perf-debuginfo@4.18.0-553.174.1.el8_10?arch=x86_64","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"NFV-8.10.0.Z.MAIN.EUS:kernel-rt-modules-0:4.18.0-553.174.1.rt7.515.el8_10.x86_64","product":"kernel-rt-modules-0:4.18.0-553.174.1.rt7.515.el8_10.x86_64 as a component of Red Hat Enterprise Linux NFV (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83159"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/kernel-rt-modules@4.18.0-553.174.1.rt7.515.el8_10?arch=x86_64","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"RT-8.10.0.Z.MAIN.EUS:kernel-rt-modules-extra-0:4.18.0-553.174.1.rt7.515.el8_10.x86_64","product":"kernel-rt-modules-extra-0:4.18.0-553.174.1.rt7.515.el8_10.x86_64 as a component of Red Hat Enterprise Linux RT (v. 8)","status":"fixed","remediations":[{"category":"vendor_fix","details":"For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258\n\nThe system must be rebooted for this update to take effect.\n\nRed Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture.\n\nBecause of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available.","url":"https://access.redhat.com/errata/RHSA-2026:83159"},{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."}],"purl":"pkg:rpm/redhat/kernel-rt-modules-extra@4.18.0-553.174.1.rt7.515.el8_10?arch=x86_64","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_10:kernel","product":"kernel as a component of Red Hat Enterprise Linux 10","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/kernel","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_10:kernel-debug-core","product":"kernel-debug-core as a component of Red Hat Enterprise Linux 10","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/kernel-debug-core","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_10:kernel-rt-64k-debug-core","product":"kernel-rt-64k-debug-core as a component of Red Hat Enterprise Linux 10","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/kernel-rt-64k-debug-core","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_10:kernel-rt-kvm","product":"kernel-rt-kvm as a component of Red Hat Enterprise Linux 10","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/kernel-rt-kvm","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_10:python3-perf","product":"python3-perf as a component of Red Hat Enterprise Linux 10","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/python3-perf","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_9:kernel-64k-modules","product":"kernel-64k-modules as a component of Red Hat Enterprise Linux 9","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/kernel-64k-modules","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_9:kernel-debug-uki-virt-addons","product":"kernel-debug-uki-virt-addons as a component of Red Hat Enterprise Linux 9","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/kernel-debug-uki-virt-addons","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_9:kernel-rt-64k-debug-modules","product":"kernel-rt-64k-debug-modules as a component of Red Hat Enterprise Linux 9","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/kernel-rt-64k-debug-modules","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_9:kernel-rt-debug-kvm","product":"kernel-rt-debug-kvm as a component of Red Hat Enterprise Linux 9","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/kernel-rt-debug-kvm","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_9:kernel-tools-libs-devel","product":"kernel-tools-libs-devel as a component of Red Hat Enterprise Linux 9","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/kernel-tools-libs-devel","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_9:rv","product":"rv as a component of Red Hat Enterprise Linux 9","status":"known_affected","remediations":[{"category":"workaround","details":"Prevent the `raid456` kernel module from loading if software RAID 4, 5, or 6 functionality is not required.\n\n1. Add the blacklist configuration by creating `/etc/modprobe.d/blacklist-raid456.conf` with the following entries:\nblacklist raid456\ninstall raid456 /bin/true\n\n2. Unload the module if it is currently loaded:\n# modprobe -r raid456\n\nWarning: If software RAID 4, 5, or 6 is currently in use or required for storage arrays, this workaround cannot be applied, as disabling the module will prevent storage devices from functioning. A system reboot may be required if the module is actively in use by existing mounts."},{"category":"none_available","details":"Affected"}],"purl":"pkg:rpm/redhat/rv","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_6:kernel","product":"kernel as a component of Red Hat Enterprise Linux 6","status":"known_not_affected","remediations":[],"justification":"vulnerable_code_not_present","purl":"pkg:rpm/redhat/kernel","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_6:kernel-devel","product":"kernel-devel as a component of Red Hat Enterprise Linux 6","status":"known_not_affected","remediations":[],"justification":"vulnerable_code_not_present","purl":"pkg:rpm/redhat/kernel-devel","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_6:kernel-kdump","product":"kernel-kdump as a component of Red Hat Enterprise Linux 6","status":"known_not_affected","remediations":[],"justification":"vulnerable_code_not_present","purl":"pkg:rpm/redhat/kernel-kdump","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_7:bpftool","product":"bpftool as a component of Red Hat Enterprise Linux 7","status":"known_not_affected","remediations":[],"justification":"vulnerable_code_not_present","purl":"pkg:rpm/redhat/bpftool","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_7:kernel-debug","product":"kernel-debug as a component of Red Hat Enterprise Linux 7","status":"known_not_affected","remediations":[],"justification":"vulnerable_code_not_present","purl":"pkg:rpm/redhat/kernel-debug","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_7:kernel-kdump","product":"kernel-kdump as a component of Red Hat Enterprise Linux 7","status":"known_not_affected","remediations":[],"justification":"vulnerable_code_not_present","purl":"pkg:rpm/redhat/kernel-kdump","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_7:kernel-rt-debug-devel","product":"kernel-rt-debug-devel as a component of Red Hat Enterprise Linux 7","status":"known_not_affected","remediations":[],"justification":"vulnerable_code_not_present","purl":"pkg:rpm/redhat/kernel-rt-debug-devel","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_7:kernel-rt-trace","product":"kernel-rt-trace as a component of Red Hat Enterprise Linux 7","status":"known_not_affected","remediations":[],"justification":"vulnerable_code_not_present","purl":"pkg:rpm/redhat/kernel-rt-trace","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_7:kernel-tools","product":"kernel-tools as a component of Red Hat Enterprise Linux 7","status":"known_not_affected","remediations":[],"justification":"vulnerable_code_not_present","purl":"pkg:rpm/redhat/kernel-tools","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]},{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json","productId":"red_hat_enterprise_linux_7:python-perf","product":"python-perf as a component of Red Hat Enterprise Linux 7","status":"known_not_affected","remediations":[],"justification":"vulnerable_code_not_present","purl":"pkg:rpm/redhat/python-perf","origins":[{"source":"redhat","sourceId":"CVE-2026-93262","modified":"2026-10-14T22:59:38+00:00","url":"https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-93262.json"}]}],"vendorCoverage":{"total":377,"shown":32,"omitted":345,"source":"redhat"}}